Everything you need for quick emergency repairs to your tent. Made in USA.

Includes:

• 2 pieces approximately 20 cm x 20 cm waterproof canvas material
• 1 piece approximately 20 cm x 20 cm nylon window screen
• Needle
• Thread
• Tube of Coghlan's Canvas Cement

Tent & Gear SolarWash Spray-On

Nikwax Tent & Gear SolarWash™ can extend the life of tents by 50 percent, just by cleaning!

Ultraviolet (UV) light and dirt are the two most significant sources of damage for tents. UV light attacks the fabric, reducing its strength and causing fading. Dirt interferes with the water repellency of the tent, causing the fabric to absorb water.

Nikwax’s Tent & Gear SolarWash is a water-based cleaning spray for tents and other outdoor equipment that protects against UV degradation whilst removing dirt, and unlike normal detergents, does not leave behind residues that damage water repellency.

As with all of Nikwax’s technical cleaners, Tent & Gear SolarWash does not just clean. Just one use increases the fabric’s resistance to UV light by 50 percent. It also helps to revitalise water repellency.

Tent & Gear SolarProof

The easy to use, safe, high performance waterproofing and UV blocker for all synthetic weatherproof textiles. For canvas tents use Nikwax Cotton Proof™

Adds Durable Water Repellency, increases fabric strength & protects against UV deterioration; one application can double the effective life of fabrics. Can be applied to wet or dry synthetic fabrics.

Use Nikwax Tent & Gear SolarProof® when your gear is new or wash your tent first with Nikwax Tent & Gear SolarWash™

To most effectively benefit from the ultraviolet (UV) and Durable Water Repellent (DWR) protection of Nikwax Tent & Gear SolarProof® it is best applied to equipment from new.

During use the equipment fabric will pick up dirt and other contaminants which stop water from beading on the fabric surface. When this occurs the DWR can be revitalised by cleaning with Nikwax Tent & Gear SolarWash.

Over time the DWR will wear off through use. Both the DWR and UV protection can be replenished by reapplication of Nikwax Tent & Gear SolarProof®.

Being water-based, Nikwax Tent & Gear SolarProof® is safe to apply.

Alternative waterproofing products are solvent-based, aerosols, or use fluorocarbons and leave a surface coating on your outdoor equipment. These products are flammable and from a health point of view it is best not to breathe in their solvent or propellant content.

Nikwax Tent & Gear SolarProof® is a safe product to use on your outdoor equipment. It is water-based, non-flammable, contains no volatile organic compounds (VOCs) and is fluorocarbon free.

Nikwax Tent & Gear SolarProof® has been specifically designed and optimised for outdoor equipment to provide Durable Water Repellency (DWR) and ultraviolet (UV) protection. Unlike solvent-based products, which need to be applied to dry materials, Nikwax Tent & Gear SolarProof® can be applied to wet or dry fabrics. So if your equipment is wet there is no need to wait for it to dry before you treat it with Nikwax Tent & Gear SolarProof®.

Is your tent flooring worn out? The high performance water-based urethane formula in Tent Sure makes it easy to recoat worn areas for longer life and total water resistance. You can use Tent Sure on tent floors, clothing, bivy bags, rainwear, accessories and more. If it’s made of synthetic fabric, Tent Sure can make it waterproof.

Waterproofs up to 85 sq ft.

Follow instructions carefully. This product is to be applied with the foam applicator brush supplied in a thin even coat. Do not allow to form puddles. Allow 24 hours before use or storage. Test surface for dryness before folding.  

Tear Aid vinyl repair kit Type B – Fabric repair with a peel and stick see thru patch. TEAR-AID’S unique composition stretches and recovers absorbing the force that causes ordinary repair products to tear off.

Tear-Aid Type B is to be applied to Vinyl and PVC coated surfaces only. If the top layer of the product you are adhering the patch to is vinyl or vinyl coated you will use Type B.

Tear Aid Type B Vinyl Repair Kit consists of

(1) 3″ x 12″ TEAR-AID Patch that cuts with scissors to any size
(1) 7/8″ x 7/8″ Patch
(1) 1 3/8″ x 1 3/8″ Patch
(1) 12″ Reinforcement Filament for repairing tears at edges
(2) Alcohol Prep Pads
(1) Illustrated Instructions and a Product Repair List

The Original Instant Extreme Bond Repair Patches.

Just Peel & Stick.

Repairs Holes and Tears Instantly.

• Airtight – under pressure even when stretched
• Watertight – under pressure even when stretched
• Conforms to irregular surfaces
• Cuts Easily – to any size with scissors
• See-Through Patch – works with all colours
• Won’t Turn Gummy – in high heat

Meets military and ASTM standards & specifications.

TEAR-AID’s unique composition stretches and recovers absorbing the force that causes ordinary repair products to tear off.

Contents:

1 x (3″ x 12″) Tear-Aid Patch
1 x (7/8″ x 7/8″) Tear-Aid Patch
1 x (3/8″ x 3/8″) Tear-Aid Patch
1 x 12″ Reinforcement Filament for repairing tears at edges
2 x Alcohol Prep Pads

TEAR-AID Type A will bond with canvas, most fabrics, most plastics, rubber, neoprene, fibreglass, nylon, stainless steels, aluminium, polythene, polyurethane, Gor-tex, Dacron and polyester.

Environmentally friendly product that waterproofs sewn seams on canvas, nylon and other synthetic fabrics.

• Easy to use applicator
• Colourless, flexible and washable
• Ideal for tents, tarps, rainwear and packs

Specs

• Net contents: 60 ml

A comprehensive kit that contains everything you need to make field repairs to almost any damage to your nylon tent.

Contains:

• 2 adhesive-backed nylon patches
• 2 mesh screen patches
• #4 needle
• 3 ferrules (8.5mm, 9.5mm, 11mm)
• 114cm shock cord
• 14.8ml tube of Seam Seal
• Ziploc bag for storage 

Fenwicks Cleaner for Awnings & Tents will easily remove black streaks, green algae, road traffic film, diesel fumes,and over wintering grime, etc. Suitable for cleaning synthetic and colour fast canvas fabrics.

Available in 1 litre spray

How to use Fenwicks Cleaner for Awnings & Tents

Step 1: Apply to surfaces from bottom to top.
Step 2: Allow 1 to 2 mins to soak in, but do not allow to dry.
Step 3: Agitate with a sponge or soft brush.
Step 4: Rinse thoroughly with water from top to bottom.Remove all traces of cleaner residue.
Step 5: Allow to dry.
Step 6: On porous fabrics apply Dwights waterproofing to waterproof the fabric once again.